Festool Conturo KA 65 Edge Bander Set

Description

A simple and versatile edge bander that is easy to adjust and maintain. Includes the edge bander trimming set with all the accessories for the Conturo and tools to cut edge banding to length and perfect the edge. The Conturo can be used to band inside and outside curves and circles. The trigger is used to toggle between two speeds; the faster speed is ideal for straight edges and the slow speed is good for areas requiring special care and attention, such as curves.

Features

• Simple controls make it easy to operate the machine; graphics indicate when the machine is ready to receive a piece of edge banding and when it is ready to start banding

LCD display shows what length of edge banding can be applied with the amount of glue left in the machine, the temperature and the amount of adhesive being applied

Intuitive interface makes it straightforward to adjust the glue temperature and amount of glue output

If left unused, the machine will automatically switch to cooling mode and then switch itself off once it drops below 50°C

Thermally isolated so there is no risk of burning

Includes:

• KA 65 Plus Conturo edge bander

Front handle

Edge banding reel

Additional roller

Edge banding trimmer

Carbide scraper

4x EVA adhesive, natural color

StickFix base kit with 3 felt pads

80mm × 133mm hand sanding block

5x StickFix polishing felt 80mm × 133mm

20x Brilliant StickFix abrasive P320 sheets 80mm × 133mm

5x Vlies StickFix S800 abrasive cloth 80mm × 133mm

Systainer SYS 4 TL case

To order replacement parts for Festool products, please contact our customer service department.